Measurements

You can use the measurement tool in Trimble Connect for Mobile’s 3D Viewer to measure distances in the 3D View using either the 3D viewer.

Quick Tip

Make sure the setting for viewing measurements and markups are turned on. You can do this by going to the Model Display Settings.

Creating Measurements

Creating measurements is possible in the New 3D Viewer and the Legacy 3D Viewer.

To create a measurement

  1. Open a model in Trimble Connect for Mobile.

  2. Tap the Add button in the toolbar.

  3. Tap the Measurement button.

  4. Tap the first point.

  5. Tap the second point.

  6. The measurement will be placed.

  7. Create a View or ToDo to save.


Note

You can choose the measurement color from the measurement toolbar.

Remove Measurements

Remove a Single Measurement

To remove a measurement

  1. Select a measurement in the model.

  2. A toolbar opens at the bottom

  3. Tap the Delete button on the toolbar.

  4. The selected measurement is deleted.



Remove All Measurements

To remove all measurements

  1. Select a measurement in the model.

  2. A toolbar opens at the bottom.

  3. Tap the Delete All Measurements button.

  4. A confirmation message opens.

  5. Tap Yes.

  6. All measurements will be deleted in the model.



Next Topic: 3D Markups